Unused Norland Bottle Blow Molder, Freedom 3000
Unused Norland Bottle Blow Molder, Freedom 3000
Location:Toronto, Canada
Description
Norland Freedom 3000 Automatic Blow Molding Machine BM3000. Machine was purchased new in 2007 and is set up for 28mm pre-form neck finish. Unit is designed to produce stretched PET bottles from 0.2 litres to 1.5 litres and up to 3,000 bottles per hour. Specifications of blow molder: Number of temperature zones: 8. Number of Heating Ovens: 4. 4 Cavity Aluminum mold. Electrics: 3/60/208-230 volts. Initial blowing: 150 PSI. Final blowing: 430-435 PSI. Air consumption at 150 PSI: 36 CFM. Air consumption at 400 PSI: 108 CFM. Machine dimensions: 98” High x 73” Wide x 128” Long. Weight: 2,500 pounds.
Notes: The machine was purchased Unused in 2012 by a second customer. They wanted to run 32mm pre-form bottle necks however, the OEM said the changeover from 28mm could not be done. The machine was never used again. It requires a good cleaning and a tune-up.
Specifications
| Manufacturer | Norland |
| Model | BM3000 |
| Year | 2007 |
| Condition | Used |
| Stock Number | 371 |
| Neck Size | 28mm |
| 3/60/208-230 volts. Initial blowing | 150 PSI. Final blowing |
Disclaimer
The Equipment Kings, Inc. (“TEK”) makes reasonable efforts to provide accurate information and descriptions of the Equipment; however, TEK makes no representations or warranties, express or implied, as to the accuracy, completeness, condition, authenticity, provenance, attribution, genuineness, or value of the Equipment. All Equipment is sold on an AS-IS, WHERE-IS basis.